恩恩~感謝河馬大
shyang1025
🏆🏆🏆🏆
- 金幣
- 60
OrganitR這是什麼東南西北啊？
Organit
Regenerable Dissolved Organic Material Adsorption Resin for all Marine & Freshwater Aquaria.
[FONT=新細明體]可重複性使用於淡海水族箱中吸附有機鹽類的樹脂[/FONT]
Overview
· Improves water quality by removing latent dissolved organic material and encouraging higher oxidation-reduction potential(ORP, also known as “redox”).
[FONT=新細明體]能經由吸附水中有機鹽類提高養化還原電位的方式達到改善水質的效果[/FONT]
· Removes dyes and discoloration from water.
[FONT=新細明體]能移除水中的有色物質跟染料[/FONT]
· Will not release adsorbed organic material once exhausted.
[FONT=新細明體]當吸附飽和時不會發生釋出的情形[/FONT]
· Ideal for use in small (e.g. “nano”) aquaria where a protein skimmer is not feasible
[FONT=新細明體]針對因小體積無法使用蛋白質除沫器的水族箱也可以使用[/FONT]
· Does not actively remove trace, minor, or major elements from aquarium.
[FONT=新細明體]不會吸附其它微量元素[/FONT]
· May be used in conjunction with, or as a replacement for, activated carbon.
[FONT=新細明體]可以合併活性碳或是取代活性碳使用[/FONT]
· Synthetic polymer resin beads provide for durability and excellent flow characteristics; may be employed in fluidized-bed, canister, or passive filtration.
[FONT=新細明體]本產品是聚合樹脂須讓水流通過才有吸附效果，可考慮使用流沙床、容器或是被動是吸附過濾的方式。[/FONT]
· Regenerable over 250 times, dramatically increasing cost effectiveness.
[FONT=新細明體]可經由環源方式重複使用[/FONT]250[FONT=新細明體]次[/FONT]
[FONT=新細明體]使用與建議[/FONT]
Prior to first use, rinse resin under a stream of fresh water, then discard water. Used as directed, each 500ml of resin will help maintain water quality in 300 US-gallons. Resin will discolor with continued use, indicating exhaustion; regenerate once the resin becomes medium-brown in appearance. The original brightness of the resin may not be re-attained, however the resin will perform as well as before. Continued use and regeneration on a weekly basis will help reduce the prevalence of dissolved organic material and promotes good water quality; used in this fashion, the resin is effective for up to five years. To a point, effectiveness of resin is directly related to the reaction time it has with aquarium water: the longer the reaction time, the more effectively it will remove organic material. In all cases, the use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will prolong effectiveness. Fluidized-bed filtration: follow instructions of filter manufacturer for optimal volume of media to use in reaction chamber; start at a low flow rate and adjust to keep media in a steady “churn” within lower 2/3 of chamber. Canister filtration: Load resin into filter as directed by manufacturer; regenerate as directed.
[FONT=新細明體]在第一次使用之前請用純水清洗過後再直接使用。以每[/FONT]500ml[FONT=新細明體]對應[/FONT]1200[FONT=新細明體]公升比例使用。當樹脂失去顏色時即代表因吸附飽和而失去活性，只要還原成棕色即可再次使用。雖然還源後的顏色與最早購買樹脂明亮的顏色不同，但仍具有相同吸附效果。以每周持續吸附與還原的方式使用將可維持良好水質，經由這樣使用方式產品壽命可達五年。產品使用的要點在於讓樹脂有越充分與水接觸的時間就會有越好的吸附效果。若再利用樹脂過濾錢能通過預過濾系統將會有更好的效果。流沙床過濾方式[/FONT]:[FONT=新細明體]添加適量的樹脂到流沙床內，緩慢調整調整流動數率至整罐[/FONT]2/3[FONT=新細明體]體積呈現滾動狀態。[/FONT]
Passive filtration: Place resin loosely in a 300μm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the resin beads and increases effectiveness of this method.
[FONT=新細明體]被動式過濾[/FONT]:[FONT=新細明體]將樹脂包在[/FONT]300μm[FONT=新細明體]的濾袋內放於水流區域，每隔一段時間對濾袋進行翻轉可獲得較佳的效果。[/FONT]
To regenerate: Dissolve 4 cups table salt in 1 US-gallon of room-temperature water per 250-ml of resin to be regenerated in a clean pail; place resin into pail and stir; allow beads to soak overnight; strain and rinse beads thoroughly in fresh water before re-using. Do not regenerate with bleach, which will damage resin and could kill aquarium inhabitants.
[FONT=新細明體]還原[/FONT]:[FONT=新細明體]以每[/FONT]4[FONT=新細明體]公升純水溶解[/FONT]4[FONT=新細明體]杯食鹽的濃度，將[/FONT]250ml[FONT=新細明體]樹脂放於其中並翻轉過夜，若能讓樹脂翻轉程度越充足則還原效果越好。嚴禁使用漂白水再生，否則會導致樹脂毀損並釋出的物質對水族箱生物是有毒性的。[/FONT]
Caution: Keep out of reach of children. Not for human consumption
[FONT=新細明體]請遠離兒童且不可食用[/FONT]
Note: Resin sold moist. Keep closed to prevent drying. Weight varies due to moisture content, therefore product is sold by volume rather than weight.
[FONT=新細明體]提醒[/FONT]:[FONT=新細明體]樹脂一定要保持在潮濕狀態不可讓其乾燥。樹脂的重量大多來自於潮濕的水分，因此我們用體積來做為其計算依據而非重量。[/FONT][FONT=新細明體] __________________[/FONT]
[FONT=新細明體][/FONT]
[FONT=新細明體][/FONT]
[FONT=新細明體]請參考 [/FONT]
Regenerable Dissolved Organic Material Adsorption Resin for all Marine & Freshwater Aquaria.
[FONT=新細明體]可重複性使用於淡海水族箱中吸附有機鹽類的樹脂[/FONT]
Overview
· Improves water quality by removing latent dissolved organic material and encouraging higher oxidation-reduction potential(ORP, also known as “redox”).
[FONT=新細明體]能經由吸附水中有機鹽類提高養化還原電位的方式達到改善水質的效果[/FONT]
· Removes dyes and discoloration from water.
[FONT=新細明體]能移除水中的有色物質跟染料[/FONT]
· Will not release adsorbed organic material once exhausted.
[FONT=新細明體]當吸附飽和時不會發生釋出的情形[/FONT]
· Ideal for use in small (e.g. “nano”) aquaria where a protein skimmer is not feasible
[FONT=新細明體]針對因小體積無法使用蛋白質除沫器的水族箱也可以使用[/FONT]
· Does not actively remove trace, minor, or major elements from aquarium.
[FONT=新細明體]不會吸附其它微量元素[/FONT]
· May be used in conjunction with, or as a replacement for, activated carbon.
[FONT=新細明體]可以合併活性碳或是取代活性碳使用[/FONT]
· Synthetic polymer resin beads provide for durability and excellent flow characteristics; may be employed in fluidized-bed, canister, or passive filtration.
[FONT=新細明體]本產品是聚合樹脂須讓水流通過才有吸附效果，可考慮使用流沙床、容器或是被動是吸附過濾的方式。[/FONT]
· Regenerable over 250 times, dramatically increasing cost effectiveness.
[FONT=新細明體]可經由環源方式重複使用[/FONT]250[FONT=新細明體]次[/FONT]
[FONT=新細明體]使用與建議[/FONT]
Prior to first use, rinse resin under a stream of fresh water, then discard water. Used as directed, each 500ml of resin will help maintain water quality in 300 US-gallons. Resin will discolor with continued use, indicating exhaustion; regenerate once the resin becomes medium-brown in appearance. The original brightness of the resin may not be re-attained, however the resin will perform as well as before. Continued use and regeneration on a weekly basis will help reduce the prevalence of dissolved organic material and promotes good water quality; used in this fashion, the resin is effective for up to five years. To a point, effectiveness of resin is directly related to the reaction time it has with aquarium water: the longer the reaction time, the more effectively it will remove organic material. In all cases, the use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will prolong effectiveness. Fluidized-bed filtration: follow instructions of filter manufacturer for optimal volume of media to use in reaction chamber; start at a low flow rate and adjust to keep media in a steady “churn” within lower 2/3 of chamber. Canister filtration: Load resin into filter as directed by manufacturer; regenerate as directed.
[FONT=新細明體]在第一次使用之前請用純水清洗過後再直接使用。以每[/FONT]500ml[FONT=新細明體]對應[/FONT]1200[FONT=新細明體]公升比例使用。當樹脂失去顏色時即代表因吸附飽和而失去活性，只要還原成棕色即可再次使用。雖然還源後的顏色與最早購買樹脂明亮的顏色不同，但仍具有相同吸附效果。以每周持續吸附與還原的方式使用將可維持良好水質，經由這樣使用方式產品壽命可達五年。產品使用的要點在於讓樹脂有越充分與水接觸的時間就會有越好的吸附效果。若再利用樹脂過濾錢能通過預過濾系統將會有更好的效果。流沙床過濾方式[/FONT]:[FONT=新細明體]添加適量的樹脂到流沙床內，緩慢調整調整流動數率至整罐[/FONT]2/3[FONT=新細明體]體積呈現滾動狀態。[/FONT]
Passive filtration: Place resin loosely in a 300μm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the resin beads and increases effectiveness of this method.
[FONT=新細明體]被動式過濾[/FONT]:[FONT=新細明體]將樹脂包在[/FONT]300μm[FONT=新細明體]的濾袋內放於水流區域，每隔一段時間對濾袋進行翻轉可獲得較佳的效果。[/FONT]
To regenerate: Dissolve 4 cups table salt in 1 US-gallon of room-temperature water per 250-ml of resin to be regenerated in a clean pail; place resin into pail and stir; allow beads to soak overnight; strain and rinse beads thoroughly in fresh water before re-using. Do not regenerate with bleach, which will damage resin and could kill aquarium inhabitants.
[FONT=新細明體]還原[/FONT]:[FONT=新細明體]以每[/FONT]4[FONT=新細明體]公升純水溶解[/FONT]4[FONT=新細明體]杯食鹽的濃度，將[/FONT]250ml[FONT=新細明體]樹脂放於其中並翻轉過夜，若能讓樹脂翻轉程度越充足則還原效果越好。嚴禁使用漂白水再生，否則會導致樹脂毀損並釋出的物質對水族箱生物是有毒性的。[/FONT]
Caution: Keep out of reach of children. Not for human consumption
[FONT=新細明體]請遠離兒童且不可食用[/FONT]
Note: Resin sold moist. Keep closed to prevent drying. Weight varies due to moisture content, therefore product is sold by volume rather than weight.
[FONT=新細明體]提醒[/FONT]:[FONT=新細明體]樹脂一定要保持在潮濕狀態不可讓其乾燥。樹脂的重量大多來自於潮濕的水分，因此我們用體積來做為其計算依據而非重量。[/FONT][FONT=新細明體] __________________[/FONT]
[FONT=新細明體][/FONT]
[FONT=新細明體][/FONT]
[FONT=新細明體]請參考 [/FONT]
taco-allen
🏆🏆🏆🏅
- 金幣
- 33
那西肯的有機吸附劑也不能用漂白水還原嗎?
用漂白水還原會造成有毒物質釋出@@
如果是的話
那我找到問題的原因了...
用漂白水還原會造成有毒物質釋出@@
如果是的話
那我找到問題的原因了...
taco-allen
🏆🏆🏆🏅
- 金幣
- 33
我已經把還原過的丟了
還是不要省這個錢
得不償失
還是不要省這個錢
得不償失
