ORP 水質乾淨就會上來了, 我通常維持在350以上...剛才看了一下, 382
Cond 可以換算Specific gravity, 但溫度參數要配合...新版Apex 我沒有,even 舊版我也從來沒認真看過
ORP value 162 is too low...
Of course, you can convert Fahrenheit to Celsius.
On the probe / input web page, don't do it in Fusion.
You can also use the Display Module >Setup >Temp Setup>Scale
BTW, the New Apex looks very nice.
Best of Luck!!!
ORP value 162 is too low...
Of course, you can convert Fahrenheit to Celsius.
On the probe / input web page, don't do it in Fusion.
You can also use the Display Module >Setup >Temp Setup>Scale
BTW, the New Apex looks very nice.
Best of Luck!!!
Thank you so much to helping me !! But recently I lost my connection to my fusion hundreds of time in the last of 24 hours... I saw many people had this problem too... Awaiting response of Neptune now.
是可以重複使用但是建議使用時，倒出少量在小杯子中測量，我是取10-15ml，使用2-3次就要更換一次，才能確保準確。
ＰＨ＝＞4-7-10標準液 有現品可買
ＯＲＰ＝＞可有可無，我的工業ＯＲＰ是有但是原廠也是說，其實可不用，差異不會太大，還有若要校正，他的校正液用一次就得扔了ＸＤ～ 接觸到空氣開始氧化後數值就不同了！ 只能扔ＸＤ～
Ｃｏｎｄ＝＞ＡＰＥＸ的校正液是自家的數值，可以請實驗室製作，不過我個人覺得ＡＰＥＸ的Ｃｏｎｄ並無溫度補償，因目前使用他是跟著溫度走的溫度上升１度Ｃｏｎｄ也跟著上升１，奇怪，本身有帶溫度為何ＰＨ有做但Ｃｏｎｄ為何不做補償？！
