糗，今天剛由台中回來，想説試玩一下不同的Tunze設定....搞了半天 (Tunze controller show no USB interface detect)...弄成之後，我的紅龍RD3 Speedy突然停了(sad)...面板上還是show 80W 滿檔，怎就不運轉了.....讀了一下手冊...
"The RD 3 Pumps have an electronic and electric overload protection. If the rotor gets blocked, the motor is switched off. Once the blockade is reversed, you can restart the pump. Additionally it will, should the situation arise, restart itself for up to 12 times. If the pump is still blocked after 12 attempts “Error” occurs in the display and the pump swit- ches off permanently. Only disconnection and reconnection from and to the power supply can restart the pump. This assumes that the cause of the blockage was redeemed."
我現在比較擔心的是...如果是有東西卡住，那怎麼還秀80w power在LCD screen 上!?....
有人碰過類似狀況嗎?
3Q
"The RD 3 Pumps have an electronic and electric overload protection. If the rotor gets blocked, the motor is switched off. Once the blockade is reversed, you can restart the pump. Additionally it will, should the situation arise, restart itself for up to 12 times. If the pump is still blocked after 12 attempts “Error” occurs in the display and the pump swit- ches off permanently. Only disconnection and reconnection from and to the power supply can restart the pump. This assumes that the cause of the blockage was redeemed."
我現在比較擔心的是...如果是有東西卡住，那怎麼還秀80w power在LCD screen 上!?....
有人碰過類似狀況嗎?
3Q
?
