有誰使用過BWA有機吸附劑

[jackyma0126]

有誰使用過BWA有機吸附劑
如何還原?
還原後的顏色?

 

[MLYF]

使用飽和食鹽水還原就可以了。
顏色的話基本上你看的出變化的，
靠自己觀察吧!

 

[kenkuo]

To regenerate: Dissolve 4 cups table salt in 1 US-gallon of room-temperature water per 250-ml of resin to be regenerated in a clean pail; place resin into pail and stir; allow beads to soak overnight; strain and rinse beads thoroughly in fresh water before re-using. Do not regenerate with bleach, which will damage resin and could kill aquarium inhabitants.

簡單說就是要攪拌,然後置放過夜,再換新水沖洗!

 

[jackyma0126]

使用飽和食鹽水還原就可以了。
顏色的話基本上你看的出變化的，
靠自己觀察吧!

泡了一天顏色都沒變
不知哪裡不對

 

[yuee0015]

泡了一天顏色都沒變
不知哪裡不對

看原廠說明是需要攪拌的，或許你可以用流沙床直接去運作還原試試看。

 

[kakaryan]

泡了一天顏色都沒變
不知哪裡不對

說明上有寫：regenerate once the resin becomes medium-brown in appearance. The original brightness of the resin may not be re-attained, however the resin will perform as well as before.

就是說還原後的顏色也許變不回新的雪白，但效能不減。

 

[jackyma0126]

說明上有寫：regenerate once the resin becomes medium-brown in appearance. The original brightness of the resin may not be re-attained, however the resin will perform as well as before.

就是說還原後的顏色也許變不回新的雪白，但效能不減。

所以綜觀以上各位說法
1, 高比重的鹽浸泡或是攪拌
2.浸泡或是攪拌一天後用清水沖洗
3.還原後的顏色也許變不回新的雪白，但效能不減