求救 買了磁刷不會用 賣我的水管也不會用..

The RoboSnail is very user friendly and simple to operate.
The user first has an initial preparation of the glass surface and a simple program mode to complete.
The RoboSnail can sense the aquarium top, left and right edges to calculate the appropriate cleaning pattern.
The edge locations and respective distances are then stored in its internal memory for future cleanings.
The RoboSnail will activate automatically once a day 24hrs after its last cleaning cycle requiring no input by the operator.

莫非產品有新舊差別?
不過官網只查到大小的差別。
 
考慮左邊上面黏一個一公分的玻璃 來讓它跑...
 
設定方式
1. 玻璃厚度5-6mm數字調為1、厚度6-8mm數字調為2、厚度8-10mm數字調為3
2. 充電座安裝在右上方(設定最右與最高點)
3. 先充電至亮綠燈
4. 按綠燈直到變閃爍放開,開始垂直往下跑
5. 等到欲設定的高度再按一下閃爍的綠燈隨即放開,開始往上會自動換行,換行後會繼續往下行(第一次設定低點)
6. 等到原設定的高度再按一下閃爍的綠燈隨即放開,開始回到充電座(第二次設定低點,取平均值完成設定)
最左方是跑至磁刷偏移量過大就停止清掃回充電座,所以記得不要有東西太靠玻璃

7. 先充電至亮綠燈, 按一下綠燈隨即放開會開始清掃(同時開始計時24小時後自動運作)
 
返回
上方 下方