老外的 LED 粉身碎骨

那我建議是模組化
要多寬都能直接橫向連接
 
寬度 是我設定那麼寬的 因為LED角度問題 比較無法平均照射 所以我才會把
燈具設定那樣寬,不過燈具一定會模組化,會以2呎開始
 
這組 微電腦控制
模擬 大自然 日光 為早晨到黃昏 甚至 還模擬月光...
大大加油喔...
 
have you tried use CREE Xlamp-E Q4. i have 20 it have 100 lm and much cooler
 
下面引用由dannytt2007/09/26 09:01pm 發表的內容:
have you tried use CREE Xlamp-E Q4. i have 20 it have 100 lm and much cooler
I haven';t tried yet but I';ve tried 3w HIGH POWER LED before.
http://www.ph84.idv.tw/cgi-bin/board/topic.cgi?forum=19&topic=1093&show=0
http://www.ph84.idv.tw/cgi-bin/board/topic.cgi?forum=19&topic=990&show=25
 
i want make one like solaris LED...... at hk u can buy the XLamp XR-E Q4 at USD 5 per/pcs.
but the lens.... refector.... is another problem and the temp. control.....
i read from solaris LED it use 52 and 42 degree refector.....
 
下面引用由dannytt2007/09/27 01:30pm 發表的內容:
i want make one like solaris LED...... at hk u can buy the XLamp XR-E Q4 at USD 5 per/pcs.
but the lens.... refector.... is another problem and the temp. control.....
i read from solaris LED it use 52 and 42 degree refector.....
According to the test that I';ve done, the highest W of high power LED is 500W and it can continue wording for 72 hours and stay at 40 degree
Therefore, the problem of degree control has been solved. Moreover, I';ve tried solaris LED before as well. I found that solaris LED is not better than my product.

-=-=-=- 以下內容由 s883081522007年09月27日 04:19pm 時新增 -=-=-=-
I promise, "Made in Taiwan" is better than "Made in HK". I can produce LED which is much better than what you want.
 
[這篇文章最後由s88308152在 2008/01/22 09:54am 第 1 次編輯]

新產品
目前我看過最屌的 3WLED~12X18=648W
為何會說屌 如此距離如此集中 不靠風扇 體積小 自體散熱
不過這只是樣品 目前正準備開模
19_1115_1.JPG
 
返回
上方 下方