不好意思~想請問各位大大
小弟有購買一產品：西肯Seachem 銅、重金屬吸附劑
產品網址介紹如下：http://tw.page.mall.yahoo.com/item/p0222273808
此產品說明有提到~使用一次後會變成深藍色
那小弟已經使用過~並且也已經變成深藍色
此產品實在太過於昂貴
購買一瓶對小弟而言已是很大的負擔(窮苦人家)
想請問各位大大的是~此產品有人有使用過嗎?如果有使用過是否可以還原?
假使可以還原的話~那麼請問他的步驟為何呢?
還煩請各位大大拜託幫忙~~在此小弟先謝各位大大^^千萬分的感激

http://www.seachem.com/support/FAQs/CupriSorb.html

Q: I lost the instructions describing how to regenerate CupriSorb™, could you tell me how to do it?
A: When exhausted, CupriSorb™ may be discarded or regenerated. Regenerate by soaking bag or beads in a non-metal container with 2 cups of water and 1/2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is better done outside and away from children. Soak for an hour, rinse well. Repeat as required to restore the original color. Rinse well, add baking soda (sodium bicarbonate) until foaming stops, and rinse again. CupriSorb™ is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate, then regenerate as HyperSorb™ or Purigen®. Use MultiTest: Copper™ to monitor copper.

外國人說: 把Seachem 銅、重金屬吸附劑放到桶子裡 在桶子裡加兩杯水半杯氫氯酸(muriatic acid = hydrochloric acid)然後泡一個小時 一小時後用水沖洗 如果還是藍色的再用兩杯水半杯氫氯酸泡一個小時直到還原到原色 恢復到原色之後用水加蘇打粉加到沒起泡為止 再用水沖洗就可以了

*我自己是沒試過 之前都直接丟掉 只是您提起這個問題好奇下去google搜尋看到的 下次我可以試試看

感謝馬克大大的解說

千萬分的感激